Dedusting and ionization with Venjakob

Why dust removal and ionization are important for a brilliant surface coating

In the run-up to almost every surface coating, in almost every application in the most diverse areas of industry, dust on the workpieces can become a problem for the planned coating. In most cases, simply removing dust from the surface is not enough. The existing electrostatic charge often requires more than just the application of a dust removal process. While our dedusting devices remove adhering dust particles from the workpieces using blowing nozzles, additional ionizing devices act on the electrical field of the component surface. It is precisely this electrostatic charge that promotes the adhesion of dust. This is precisely why we at Venjakob combine both processes: first ionization, then dust removal with a blow-off device.

The advantage of individually equipped dedusting systems

Many factors play a role in individual coordination: we take all this information into account when integrating the best possible dedusting process into your production process. After all, our aim is not to offer you just any dedusting system, but the solution that will benefit you the most in the long term. That is why we offer you a wide range of dedusting/ionization systems to suit the requirements of your production process. All Venjakob dedusting systems are equipped with blowing nozzles that remove dust particles from the workpieces. Optionally, they can also be equipped with rotating real hair brushes. Depending on requirements, the dedusting systems also include an ionization unit that removes electrostatic charge from the surface so that the dust particles can be removed from the surface even better. We will be happy to discuss these and other features with you individually.

For which areas of application are dedusting systems and ionizing units intended?

For the separation of dust by means of exhaust air - for dusts and dust particles, dust quantities and similar foreign components - we design individual dedusting systems and ionization units for you. These systems are used throughout industry.

Typical applications for dedusting and ionization can be found, for example, in the

• Wood industry
• Plastics industry
• Glass industry
• Metals industry
• Building materials industry

Dust removal for wooden surfaces

In the woodworking industry - be it for the manufacture of kitchens, home and office furniture, in store fitting and interior design or in yacht finishing - workpieces are almost always sanded first. In the production process, the workpieces then pass through an integrated sanding machine into the downstream dust extraction unit before being coated or industrial finished. When wood is processed in this way, very fine particles are released that cannot always be completely captured - no matter how good the extraction system is. A high-performance dust extraction system is required to capture and separate these dust particles, which are deposited on the surface of the workpiece. For this application in the woodworking industry, we therefore often offer additional brush units to remove coarse wood chips from the surface from upstream sanding or drilling. These are mainly real hair brushes. An extraction system with integrated filtering then removes the detached dust particles from the system with an optimum degree of separation.

When dealing with plastics/glass and metals surfaces, the primary concern is the removal of particles contained in the normal room air. The electrostatic charge contributes to an even stronger adhesion of the particles.

All these contaminants must be removed without residue before the coating process in order to achieve an optimum surface result.

Materials that require ionization

When handling workpieces made of plastics, granulate or metals, the primary aim is to remove particles from the component surface. The electrostatic charging of the components contributes to an even stronger adhesion of the particles. In addition to dedusting, ionization - also known as ionization - is urgently recommended here because it influences the electrostatic energy of the components. But how exactly does this affect the different materials?

The pre-treatment of glass

Especially in the coating of decorative glass, functional glass, architectural glass or safety glass, the varying cleaning requirements in the production process must be taken into account for applications such as sol-gel for reflection reduction or hydrophobization and hydrophilization. Dust removal is also a decisive step in the run-up to the actual coating.

The requirements for plastics coatings

High-quality plastics coatings represent a similarly complex field of application. Many products used in building services and consumer electronics as well as household and electrical appliances have a coating. Dedusting and ionization are essential if the quality of the coating is to be right in the end.

Also relevant for building materials

Dust removal may also be required for building materials such as façade cladding, acoustic ceiling panels and insulating materials - to name just a few. The surface pretreatment depends on the application and the requirements.

The quality of the products is crucial

Ultimately, it is important to remove all these contaminants without leaving any residue before the coating process in order to achieve an optimum surface result. Only then can the perfect quality of the coated products be guaranteed. The design of the processes varies from system to system, from application to application. At Venjakob, we adapt to your specific requirements.

Individually, integrated into your processes or retrofitted

In general, our customers always receive a complete solution from us, with all components. Systems - not from a modular system, but individually designed for the specific coating task. But often a coating system already exists. In such cases, retrofitting is possible - or a stand-alone solution. In either case, we help to ensure that you always remain flexible in your production.

Good to know: Information on cleaning, dust removal and ionization

In summary, it can be said that foreign particles have no place on surfaces to be coated. The question of how cleaning and removal should be carried out and what can happen in the process also depends on whether only dust is involved. It should be noted that an electric field can sometimes form on a surface, which makes it difficult to capture dust particles. This problem can be eliminated by ionization, which cancels out the electrostatic charge of the particles so that separation is possible with a fan or blowing nozzles.

And now? Let's talk about dedusting and ionization

Your Finishing Line - Our Process Experience. This is what Venjakob stands for. A large part of this process experience relates to the process steps that precede the actual coating. The cleaning processes that precede the coating process are highly complex. The production lines and process steps vary depending on the materials - be it wood, plastics, glass, metals or other building materials - and the end products. A wide variety of parameters play a role here. Know-how is required, starting with the various cleaning, activation and pre-treatment processes. Dedusting and ionization are just two processes. If you want to find the right solution here, you need to understand when which process is the best possible within the overall concept of a system. This requires not only knowledge, but above all trust. And it is precisely this - this special form of trust - that characterizes the cooperation with Venjakob. This is proven by countless successfully completed customer projects. If ionization and dedusting - or cleaning processes in general as part of a coating project - are an issue for you, let's talk. And even better: let's not just talk to each other. Let us do it. Because we understand our business. And yours.