Exhaust Gas Purification, regenerative-, thermal-, catalytic incinerator

Exhaust Gas Purification

and energy recovery in a systematic approach.

For decades, efficient removal of harmful substances and efficient energy recovery have been instrumental in the consequent expansion of our performance spectrum.

Latest technology and long-standing expert knowledge of our employees are the foundation for us to realise innovative engineering technology setting the quality standard in exhaust air filtering.

Whether regenerative post-combustion systems (RVA) or regenerative thermal oxidisers (TVA), our environmentally friendly exhaust air filter systems always ensure that the current VOC directives are met.

VEN CLEAN AIR RVA

The Regenerative Thermal Oxidiser ( RTO ) represents the most cutting edge technology in the field on purifying Volatile Organic Compounds ( VOC ). The procedure is based upon the fact thet also lower amounts of volatile pollutants can be burnt under suitable conditions without producing residue. First and foremost these conditions require a combustion chamber with a temperature measuring over 800°C. That means that all of the exhaust

The thermal incinerator is a system which converts gas or vaporous pollutants found in the exhaust gas in to non-polluting compounds by way of direct combustion. The procedure is based upon the fact that lower amounts of volatile pollutants can be burnt under suitable conditions without producing residue. First and foremost these conditions require a combustion chamber with a temperature measuring over 750 °C.

The Catalytic Thermal Oxidiser (CTO) is an economic alternative of cleaning organic air pollutants. The procedure is based upon the fact that lower amounts of volatile pollutants can be burnt under suitable conditions without producing residue. his process would have required a high amount of heat energy and therefore a catalyser and heat exchanger is installed. The shell and tube...

heat exchanger system for the purpose of utilising waste heat

For its exhaust gas purification systems Venjakob Umwelttechnik offers heat exchanger systems for the purpose of utilising waste heat. These stand out for the following reasons: Higher rigidity and vibration strength, Lower amount of lost pressure, Higher corrosion resistance, Lower soiling tendency, Compact design, A high level of operating efficiency. We build heat exchangers as complete systems for the purposes of heating water, vapour, air, exhaust gas or thermal oil.

During the adsorption process, the pollutants are physically bonded / retained on the surface of a solid material (e.g. activated carbon, zeolite). The pollutants are then removed once again / desorbed from the zeolites by means of a small, hot flow of gas and a high pollutant load. Finally, the exhaust flow arising from the...

Language Selection

Searchform

Systematic Surface AND EXHAUST AIR PURIFICATION Expertise